Easy to use, consistent and loved by medical professionals worldwide. The Spentys app is the first all-in-one 3D scanning, 3D modeling and 3D printing solution that enables medical professionals to create high-quality 3D...
Easy to use, consistent and loved by medical professionals worldwide. The Spentys app is the first all-in-one 3D scanning, 3D modeling and 3D printing solution that enables medical professionals to create high-quality 3D printed orthoses faster and at lower costs. The implementation of 3D technology in the O&P industry is often flawed, too technical, and not compliant with clinical requirements. That’s why we have spent thousands of hours building a solution dedicated to O&P that can co-exist with your current production workflows and is easy to setup. Intuitive interface, easy-to-use and medical-validated No CAD knowledge required More time- and cost-efficient production of custom-made orthoses Consistency in design and production MDR compliant (UE Council Regulation 2017/745 of 5 April 2017) ISO-requirements based quality management system Centralized management of your whole orthoses production 3D SCANNING PORTABLE: A portable scanner that offers great flexibility during the scanning process and is easy to take along when visiting patients remotely. ACCURATE: All geometries, variables and irregularities of the patient’s limb are scanned with a 1mm accuracy in less than a minute AI-BASED: The scan data is instantly reviewed by our AI-based software, which enhances the data and automatically corrects imperfections in the scan DIGITAL STORAGE: The patient’s 3D scan is stored in your cloud storage and can always be consulted for reimbursement justification and for device replacements or repairs 3D MODELLING EASY TO USE: The Spentys software lets you design the orthosis directly on the patient’s scan through an easy-to-use digital interface. GUIDED WORKFLOW: Our guided workflows help you step-by-step through the designing process. CREATIVE FREEDOM: No CAD-knowledge required at all. Design the shape of the splint yourself: splint length, position of alveoli, thumb immobilisation, ... 3D PRINTING FLEXIBILITY: Produce in-house with your own 3D printers, or communicate directly with our state-of-the-art production facility through our open platform. PRINT PARAMETERS: Leverage Spentys’ pre-defined print parameters to avoid bad print quality. KEEP PRINTS ORGANISED: Our platform allows you to easily visualize all your orders and check their production status. Data of the patient is centralised in a secure digital environment. PROCESS MANAGEMENT: The Spentys platform allows you to monitor the production status of your patient’s orthoses in real-time. TRACEABILITY: If you take care of production yourself, it gives you the possibility to have traceability for all your prints: What printer was used, What spool was used, What material was used, When the print was launched and finished, etc.
Version History - Expanded whitelabelling 1.17.4 03/07/2025 - Updated to Structure SDK 3.2.0 1.17.3 03/05/2025 - Miscellaneous fixes - autoForma: performance improvements in editor step - autoForma: extended editability to the shape at the base of the splint 1.17.2 02/10/2025 -autoForma: performance improvements in editor step -autoForma: extended editability to the shape at the base of the splint 1.17.1 01/30/2025 - Added switch control to turn on/off the boundary reconstruction in the AutoForma thickness step - Bug fixes and various improvements 1.17.0 01/09/2025 - Removed unit (mm) for the Pin closing system. - Fixed bug where the boundary thickness and flare sliders performed the same action. 1.16.2 12/19/2024 - UI refactoring - Implementation of many new features for the creation of future templates (holes pattern, trimline control, superposed and multi-parts, and edges reconstructions) - Bug fixes 1.16.1 12/10/2024 - Structure SDK update - Structure Sensor Mark III support 1.16.0 11/14/2024 - Improvements to the boundary reconstruction feature in freeForma and autoForma - UI Improvements - DLP thickness range adjusted for better results 1.15.0 10/22/2024 - Enhanced boundary reconstruction for improved performance and accuracy. - Added support for multiple 2D profiles in boundary reconstruction for better precision and flexibility. - Integration of a customised product. 1.14.1 09/12/2024 This release features improvements to Forma: - Invalid closing systems are displayed in red even if they're not selected. - In AutoForma, when the model was generated, there could be visible "corner" on the edge of the splint. It has been fixed. - The minimum hole-hole distance has reduced from 5mm to 2.5mm. - Correction on rivet holes minimal distance. - The closing system now updates itself when its position becomes correct again without having to move it. - 2 belts position from Rail On Belt Loops Closing System on A5 has been corrected. 1.14.0 08/28/2024 - Comb integration - New Slotted Hole closing system. - Closing Systems level UI improvements : instead of separate buttons, now there is a dropdown menu for the selection of the desired closing system. - Increase max Beltloop Length to 55mm. - Beltloop Length now takes into account the thickness (i.e. by inputting 25mm the clear space for the strap will be the very same size, before if was size - thickness). - Draggable Thumb trimline in AutoForma: for templates with thumb immobilisation there is now the possibility to easily edit the trimline of the interphalangeal immobilisation by dragging one single node. The trimline is constrained to be always planar. - Closing Systems "Mushroom Pin" now renamed to "Pin". - More safety margin for placement rivet holes: distance to boundaries set to 5mm from border to border: distance hole to hole is now detected and the placement is allowed only if distance is bigger than 5mm. - Thumb circumference visualiser updates when stepping back: In modeling for thumb immobilisation (free and auto Forma) the visualisation of the thumb circumference was not correctly updated when stepping back. Bug fixed. - Forma: limit push/pull at the sculpt level set to 15mm. - Forma: default brush diameter in freeforma set to 20mm. - AutoForma Editor Step: Added new selection functionality for alveoli patterns which allows the user to display the pattern configuration panel by clicking on the alveoli themselves. - AutoForma Editor Step: added a switch to exclude / include the alveoli of all patterns from the splint geometry. It can be used in case the user wants to quickly make a splint with no alveoli. - AutoForma Editor Step: simplified the controls of the configuration for alveoli pattern: removed the radius slider as it was redundant with density slider. The user can achieve the same results by having simpler controls. - Improved communication with the Structure Sensor 1.13.3 07/15/2024 - Comb integration - New Slotted Hole closing system. - Closing Systems level UI improvements : instead of separate buttons, now there is a dropdown menu for the selection of the desired closing system. - Increase max Beltloop Length to 55mm. - Beltloop Length now takes into account the thickness (i.e. by inputting 25mm the clear space for the strap will be the very same size, before if was size - thickness). - Draggable Thumb trimline in AutoForma: for templates with thumb immobilisation there is now the possibility to easily edit the trimline of the interphalangeal immobilisation by dragging one single node. The trimline is constrained to be always planar. - Closing Systems "Mushroom Pin" now renamed to "Pin". - More safety margin for placement rivet holes: distance to boundaries set to 5mm from border to border: distance hole to hole is now detected and the placement is allowed only if distance is bigger than 5mm. - Thumb circumference visualiser updates when stepping back: In modeling for thumb immobilisation (free and auto Forma) the visualisation of the thumb circumference was not correctly updated when stepping back. Bug fixed. - Forma: limit push/pull at the sculpt level set to 15mm. - Forma: default brush diameter in freeforma set to 20mm. - AutoForma Editor Step: Added new selection functionality for alveoli patterns which allows the user to display the pattern configuration panel by clicking on the alveoli themselves. - AutoForma Editor Step: added a switch to exclude / include the alveoli of all patterns from the splint geometry. It can be used in case the user wants to quickly make a splint with no alveoli. - AutoForma Editor Step: simplified the controls of the configuration for alveoli pattern: removed the radius slider as it was redundant with density slider. The user can achieve the same results by having simpler controls. 1.13.2 07/11/2024 - Structure SDK 3.0.2 1.13.1 05/31/2024 - White-labelling update. - Implementation of beltloops on rail inside Closing Systems level. - Fixed bug for serial engraver blocked on the inner face of the splint. - Fixed bug for Scan correction frozen in case system language was not English. - Updated the SMO correction description. - Fixed: B model correction options not updating after changing the scan's type. 1.13.0 05/21/2024 - Introducing our new & updated B5 & B6 SMO products! - A new palette of colors and patterns is available. - Lower limb products' warranty now covers a wider range of patient weights. - Lower limb scans of casts now require a supplementary measurement sheet to be filled in for more accurate end results. - Updated color, material, and vapor smoothing options for all products. - Updated workflow for all lower limb products. - The integrated beltloop closing system has been removed for all lower limb products. 1.12.2 04/18/2024 - Bug fix on thumb offset controls - Fixed frequent crashes due to memory usage. - Improved AutoForma editor performance. - Adjusted sculpt slider limit range to 0.1-30 mm. - Changed autoForma editor scan material to transparent to mitigate the illusion of holes. - Added patch to real small holes produced close to boundaries (pattern) with a threshold of 20 mm circumference. Holes will still be visible on editor step, but filled as the user moves on thickness step. - Fixed bug for text engraver affecting beltloop. - Restored Width slider in autoForma editor to give more control on the design in case of flexible materials. It can also be used to remove completely the alveoli. - Hidden textured scan at Forma start. Can be shown by raising transparency value. 1.12.1 03/22/2024 - Fixed frequent crashes due to memory usage. - Improved AutoForma editor performance. - Adjusted sculpt slider limit range to 0.1-30 mm. - Changed autoForma editor scan material to transparent to mitigate the illusion of holes. - Added patch to real small holes produced close to boundaries (pattern) with a threshold of 20 mm circumference. Holes will still be visible on editor step, but filled as the user moves on thickness step. - Fixed bug for text engraver affecting beltloop. - Restored Width slider in autoForma editor to give more control on the design in case of flexible materials. It can also be used to remove completely the alveoli. - Hidden textured scan at Forma start. Can be shown by raising transparency value. 1.12.0 03/18/2024 This version contains various improvements to Forma: - Translations updated - Engraving bug fixed - AutoForma bug fixed - Simplified UI of Thumb Editor in Scan Correction - Solved issue of low resolution mesh as output of Advanced Pose in Scan Correction (upper/lower limb) - Upgraded all autoForma templates to improved design quality and editing controls - Simplified UI of autoForma Editor and Thickness steps - Changed Icon for Textured Scan visibility button - Implemented free Beltloop/Buckle inside Closing Systems level (freeForma and autoForma) 1.11.1 03/05/2024 This version contains various improvements to Forma: - Simplified UI of Thumb Editor in Scan Correction - Solved issue of low resolution mesh as output of Advanced Pose in Scan Correction (upper/lower limb) - Upgraded all autoForma templates to improved design quality and editing controls - Simplified UI of autoForma Editor and Thickness steps - Changed Icon for Textured Scan visibility button - Implemented free Beltloop/Buckle inside Closing Systems level (freeForma and autoForma) 1.11.0 03/01/2024 - Improved closing system choices for A / H / W / Q models around the fingers. - Fixed bugs regarding the closing system choice and model review. 1.10.1 02/20/2024 Upper Limb - A, H, W, and Q products have a new closing system step that allows you to pinpoint exact locations and combine multiple closing system configurations. - Spentys closing system added as an option for H1/2, W1-4, and A1-4 print using MJF/TPU. AFO - A new AFO Patient step has been added. This step contains the patient's height, weight, clinical profile, and activity level. - Thicknesses are now in terms of effect (e.g. "flexible", or "extra rigid"), rather than millimeters. - Vapor smoothing is enabled for all AFO orders. - Color options and the medium joint size have been removed for now. General - B products have a demo scan available of both a mold and a foot, dependent on limb side. - PA11 has been removed as a material choice for now. 1.10.0 02/07/2024 - Thumb correction bug fix 1.9.2 11/10/2023 This update fixes various bugs: - Scan correction activated for A5 - AutoForma activated for W3/4 - Designer: "amount of beltloops" input changed from free text to pre-defined options for consistency - Improved thumb landmarks - Updated text for thumb circumference slider - Fixed scale factor issue for foot template (toes) - Fixed engraving bug - Restored nodes rebuild for curves in Sketch 1.9.1 10/31/2023 - New thumb reconstruction level - Visualization and editing of thumb circumference in freeForma and autoForma - Improved landmark placement - Improved Boundaries Thickness tool - Select the type of your scan (direct limb, cast, or mold) to customise the workflow. - Add notes on every step of your order using the new note editor. - Vapor smoothing option when printing MJF. - Disabled FDM option when printing B models at Spentys. - Bug fixes 1.9.0 10/19/2023
Previous Versions
Here you can find the changelog of Spentys since it was posted on our website on 2023-06-27 23:57:27.
The latest version is 1.17.4 and it was updated on 2026-10-05 13:28:53. See below the changes in each version.
Spentys version 1.17.4
Updated At: 2026-07-27
Changes: Version History - Expanded whitelabelling 1.17.4 03/07/2025 - Updated to Structure SDK 3.2.0 1.17.3 03/05/2025 - Miscellaneous fixes
- autoForma: performance improvements in editor step
- autoForma: extended editability to the shape at the base of the splint 1.17.2 02/10/2025 -autoForma: performance improvements in editor step
-autoForma: extended editability to the shape at the base of the splint 1.17.1 01/30/2025 - Added switch control to turn on/off the boundary reconstruction in the AutoForma thickness step
- Bug fixes and various improvements 1.17.0 01/09/2025 - Removed unit (mm) for the Pin closing system.
- Fixed bug where the boundary thickness and flare sliders performed the same action. 1.16.2 12/19/2024 - UI refactoring
- Implementation of many new features for the creation of future templates (holes pattern, trimline control, superposed and multi-parts, and edges reconstructions)
- Bug fixes 1.16.1 12/10/2024 - Structure SDK update
- Structure Sensor Mark III support 1.16.0 11/14/2024 - Improvements to the boundary reconstruction feature in freeForma and autoForma
- UI Improvements
- DLP thickness range adjusted for better results 1.15.0 10/22/2024 - Enhanced boundary reconstruction for improved performance and accuracy.
- Added support for multiple 2D profiles in boundary reconstruction for better precision and flexibility.
- Integration of a customised product. 1.14.1 09/12/2024 This release features improvements to Forma:
- Invalid closing systems are displayed in red even if they're not selected.
- In AutoForma, when the model was generated, there could be visible "corner" on the edge of the splint. It has been fixed.
- The minimum hole-hole distance has reduced from 5mm to 2.5mm.
- Correction on rivet holes minimal distance.
- The closing system now updates itself when its position becomes correct again without having to move it.
- 2 belts position from Rail On Belt Loops Closing System on A5 has been corrected. 1.14.0 08/28/2024 - Comb integration
- New Slotted Hole closing system.
- Closing Systems level UI improvements : instead of separate buttons, now there is a dropdown menu for the selection of the desired closing system.
- Increase max Beltloop Length to 55mm.
- Beltloop Length now takes into account the thickness (i.e. by inputting 25mm the clear space for the strap will be the very same size, before if was size - thickness).
- Draggable Thumb trimline in AutoForma: for templates with thumb immobilisation there is now the possibility to easily edit the trimline of the interphalangeal immobilisation by dragging one single node. The trimline is constrained to be always planar.
- Closing Systems "Mushroom Pin" now renamed to "Pin".
- More safety margin for placement rivet holes: distance to boundaries set to 5mm from border to border: distance hole to hole is now detected and the placement is allowed only if distance is bigger than 5mm.
- Thumb circumference visualiser updates when stepping back: In modeling for thumb immobilisation (free and auto Forma) the visualisation of the thumb circumference was not correctly updated when stepping back. Bug fixed.
- Forma: limit push/pull at the sculpt level set to 15mm.
- Forma: default brush diameter in freeforma set to 20mm.
- AutoForma Editor Step: Added new selection functionality for alveoli patterns which allows the user to display the pattern configuration panel by clicking on the alveoli themselves.
- AutoForma Editor Step: added a switch to exclude / include the alveoli of all patterns from the splint geometry. It can be used in case the user wants to quickly make a splint with no alveoli.
- AutoForma Editor Step: simplified the controls of the configuration for alveoli pattern: removed the radius slider as it was redundant with density slider. The user can achieve the same results by having simpler controls.
- Improved communication with the Structure Sensor 1.13.3 07/15/2024 - Comb integration
- New Slotted Hole closing system.
- Closing Systems level UI improvements : instead of separate buttons, now there is a dropdown menu for the selection of the desired closing system.
- Increase max Beltloop Length to 55mm.
- Beltloop Length now takes into account the thickness (i.e. by inputting 25mm the clear space for the strap will be the very same size, before if was size - thickness).
- Draggable Thumb trimline in AutoForma: for templates with thumb immobilisation there is now the possibility to easily edit the trimline of the interphalangeal immobilisation by dragging one single node. The trimline is constrained to be always planar.
- Closing Systems "Mushroom Pin" now renamed to "Pin".
- More safety margin for placement rivet holes: distance to boundaries set to 5mm from border to border: distance hole to hole is now detected and the placement is allowed only if distance is bigger than 5mm.
- Thumb circumference visualiser updates when stepping back: In modeling for thumb immobilisation (free and auto Forma) the visualisation of the thumb circumference was not correctly updated when stepping back. Bug fixed.
- Forma: limit push/pull at the sculpt level set to 15mm.
- Forma: default brush diameter in freeforma set to 20mm.
- AutoForma Editor Step: Added new selection functionality for alveoli patterns which allows the user to display the pattern configuration panel by clicking on the alveoli themselves.
- AutoForma Editor Step: added a switch to exclude / include the alveoli of all patterns from the splint geometry. It can be used in case the user wants to quickly make a splint with no alveoli.
- AutoForma Editor Step: simplified the controls of the configuration for alveoli pattern: removed the radius slider as it was redundant with density slider. The user can achieve the same results by having simpler controls. 1.13.2 07/11/2024 - Structure SDK 3.0.2 1.13.1 05/31/2024 - White-labelling update.
- Implementation of beltloops on rail inside Closing Systems level.
- Fixed bug for serial engraver blocked on the inner face of the splint.
- Fixed bug for Scan correction frozen in case system language was not English.
- Updated the SMO correction description.
- Fixed: B model correction options not updating after changing the scan's type. 1.13.0 05/21/2024 - Introducing our new & updated B5 & B6 SMO products!
- A new palette of colors and patterns is available.
- Lower limb products' warranty now covers a wider range of patient weights.
- Lower limb scans of casts now require a supplementary measurement sheet to be filled in for more accurate end results.
- Updated color, material, and vapor smoothing options for all products.
- Updated workflow for all lower limb products.
- The integrated beltloop closing system has been removed for all lower limb products. 1.12.2 04/18/2024 - Bug fix on thumb offset controls
- Fixed frequent crashes due to memory usage.
- Improved AutoForma editor performance.
- Adjusted sculpt slider limit range to 0.1-30 mm.
- Changed autoForma editor scan material to transparent to mitigate the illusion of holes.
- Added patch to real small holes produced close to boundaries (pattern) with a threshold of 20 mm circumference. Holes will still be visible on editor step, but filled as the user moves on thickness step.
- Fixed bug for text engraver affecting beltloop.
- Restored Width slider in autoForma editor to give more control on the design in case of flexible materials. It can also be used to remove completely the alveoli.
- Hidden textured scan at Forma start. Can be shown by raising transparency value. 1.12.1 03/22/2024 - Fixed frequent crashes due to memory usage.
- Improved AutoForma editor performance.
- Adjusted sculpt slider limit range to 0.1-30 mm.
- Changed autoForma editor scan material to transparent to mitigate the illusion of holes.
- Added patch to real small holes produced close to boundaries (pattern) with a threshold of 20 mm circumference. Holes will still be visible on editor step, but filled as the user moves on thickness step.
- Fixed bug for text engraver affecting beltloop.
- Restored Width slider in autoForma editor to give more control on the design in case of flexible materials. It can also be used to remove completely the alveoli.
- Hidden textured scan at Forma start. Can be shown by raising transparency value. 1.12.0 03/18/2024 This version contains various improvements to Forma:
- Translations updated
- Engraving bug fixed
- AutoForma bug fixed
- Simplified UI of Thumb Editor in Scan Correction
- Solved issue of low resolution mesh as output of Advanced Pose in Scan Correction (upper/lower limb)
- Upgraded all autoForma templates to improved design quality and editing controls
- Simplified UI of autoForma Editor and Thickness steps
- Changed Icon for Textured Scan visibility button
- Implemented free Beltloop/Buckle inside Closing Systems level (freeForma and autoForma) 1.11.1 03/05/2024 This version contains various improvements to Forma:
- Simplified UI of Thumb Editor in Scan Correction
- Solved issue of low resolution mesh as output of Advanced Pose in Scan Correction (upper/lower limb)
- Upgraded all autoForma templates to improved design quality and editing controls
- Simplified UI of autoForma Editor and Thickness steps
- Changed Icon for Textured Scan visibility button
- Implemented free Beltloop/Buckle inside Closing Systems level (freeForma and autoForma) 1.11.0 03/01/2024 - Improved closing system choices for A / H / W / Q models around the fingers.
- Fixed bugs regarding the closing system choice and model review. 1.10.1 02/20/2024 Upper Limb
- A, H, W, and Q products have a new closing system step that allows you to pinpoint exact locations and combine multiple closing system configurations.
- Spentys closing system added as an option for H1/2, W1-4, and A1-4 print using MJF/TPU.
AFO
- A new AFO Patient step has been added. This step contains the patient's height, weight, clinical profile, and activity level.
- Thicknesses are now in terms of effect (e.g. "flexible", or "extra rigid"), rather than millimeters.
- Vapor smoothing is enabled for all AFO orders.
- Color options and the medium joint size have been removed for now.
General
- B products have a demo scan available of both a mold and a foot, dependent on limb side.
- PA11 has been removed as a material choice for now. 1.10.0 02/07/2024 - Thumb correction bug fix 1.9.2 11/10/2023 This update fixes various bugs:
- Scan correction activated for A5
- AutoForma activated for W3/4
- Designer: "amount of beltloops" input changed from free text to pre-defined options for consistency
- Improved thumb landmarks
- Updated text for thumb circumference slider
- Fixed scale factor issue for foot template (toes)
- Fixed engraving bug
- Restored nodes rebuild for curves in Sketch 1.9.1 10/31/2023 - New thumb reconstruction level
- Visualization and editing of thumb circumference in freeForma and autoForma
- Improved landmark placement
- Improved Boundaries Thickness tool
- Select the type of your scan (direct limb, cast, or mold) to customise the workflow.
- Add notes on every step of your order using the new note editor.
- Vapor smoothing option when printing MJF.
- Disabled FDM option when printing B models at Spentys.
- Bug fixes 1.9.0 10/19/2023
Spentys version 1.17.4
Updated At: 2025-03-07
Changes: Mar 7, 2025
Version 1.17.4
- Expanded whitelabelling
Spentys version 1.17.4
Updated At: 2025-03-07
Changes: - Expanded whitelabelling
Spentys version 1.17.2
Updated At: 2025-02-10
Changes: Feb 10, 2025
Version 1.17.2
- Miscellaneous fixes
- autoForma: performance improvements in editor step
- autoForma: extended editability to the shape at the base of the splint
Spentys version 1.17.1
Updated At: 2025-01-30
Changes: Jan 30, 2025
Version 1.17.1
-autoForma: performance improvements in editor step
-autoForma: extended editability to the shape at the base of the splint
Spentys version 1.17.0
Updated At: 2025-01-09
Changes: Jan 9, 2025
Version 1.17.0
- Added switch control to turn on/off the boundary reconstruction in the AutoForma thickness step
- Bug fixes and various improvements
Spentys version 1.16.2
Updated At: 2024-12-19
Changes: Dec 19, 2024
Version 1.16.2
- Removed unit (mm) for the Pin closing system.
- Fixed bug where the boundary thickness and flare sliders performed the same action.
Spentys version 1.16.0
Updated At: 2024-11-14
Changes: Nov 14, 2024
Version 1.16.0
- Structure SDK update
- Structure Sensor Mark III support
Spentys version 1.14.1
Updated At: 2024-09-12
Changes: Sep 12, 2024
Version 1.14.1
- Enhanced boundary reconstruction for improved performance and accuracy.
- Added support for multiple 2D profiles in boundary reconstruction for better precision and flexibility.
- Integration of a customised product.
Spentys version 1.14.0
Updated At: 2024-08-28
Changes: Aug 28, 2024
Version 1.14.0
This release features improvements to Forma:
- Invalid closing systems are displayed in red even if they're not selected.
- In AutoForma, when the model was generated, there could be visible "corner" on the edge of the splint. It has been fixed.
- The minimum hole-hole distance has reduced from 5mm to 2.5mm.
- Correction on rivet holes minimal distance.
- The closing system now updates itself when its position becomes correct again without having to move it.
- 2 belts position from Rail On Belt Loops Closing System on A5 has been corrected.
Related Apps
Here you can find apps that are similar with Spentys.
We do not host Spentys on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for Spentys is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
